• Welcome back Guest!

    MARSH is a private reefing group. Comments and suggestions are encouraged, but please keep them positive and constructive. Negative threads, posts, or attacks will be removed from view and reviewed by the staff. Continually disruptive, argumentative, or flagrant rule breakers may be suspended or banned.

Back in it....100G build, Island Style. (1 Viewer)

Users who are viewing this thread

R-BallJunkie

Supporting Member
Joined
Aug 2, 2006
Messages
1,521
Reaction score
235
Location
Latitude N 8° 43' Longitude E 167° 44' , RMI
Yokwe and Aloha. After 25 years of aquarium keeping, i decided to take a break from reefkeeping after departing the Marshall Islands where I lived for five years.


It was a great experience living there having the ability to collect both corals and fish for my aquarium over the span of five years. I have to say, you really learn a lot when the Ocean is your local fish store. But alas, all things must come to an end. I thought about starting a new tank when i moved to the Middle East but after perusing a couple of LFS in Doha Qatar, decided against doing so given the poor selections available. Fast forward to this year, decided to get back into the game since amiss from 2015. Anyways, here's my journey back into the reefkeeping foray after a 6 year absence.

Build overview:

36x24x24 Rimless Planet Aquarium
Exotic Marine 20" Overflow Kit
Philips CoralCare Gen2 LED Light Fixture
Bubble Magus Roller Filter medium
Maxspect JUMP Protein Skimmer
2x IceCap 2K Gyre Flow Pump With Dual Pump WiFi Controller
Coral Box DCA12000 return pump
Aqueon Standard Glass Aquarium Tank 40 Gallon Breeder Sump
Jacks Rax DIY baffle kit
Marine Magic - TURF ATS
DIY Electric light raising
Stenner AWC pump 170 DM5
HydroFill Water Reservoir 15G, for AWC
AQUATICLIFE RODIw/ booster pump
Profilux Level Sensor, float & Optical for ATO
ProfiLux 4 Controller
ProfiLux KH Director
GHL Doser 2.1 SA

When I purchased my new to me house in 2019....had some minimum criteria....room for my doggy and perhaps a nice spot for a new aquarium. Check and check, perfect house. The new tank will be going where a 'wet bar' was installed previously meaning there's running water and a drain underneath the cabinetry. Perfect Perfect Perfect.



My end goal is low maintenance, self contained. I don't want to see or touch a orange home depot bucket.

Fortunately for me, i work in building automation so i have a heads up on at least conceptualizing what i want to do as for being the ultimate lazy reefer.

Some demo pics to get this thread started.

51087146292_61480d61fe_k.jpg IMG_7657 by Rballjunkie Smith, on Flickr


51087146252_1c1cae52d2_k.jpg IMG_7656 by Rballjunkie Smith, on Flickr



51083600763_8dbb81f6f5_k.jpg IMG_7660 by Rballjunkie Smith, on Flickr


51002128749_0a1c3c0524_b.jpg IMG_7659 by Rballjunkie Smith, on Flickr

51002128784_4ab27f049d_b.jpg 63010048046__3E087D17-D6B3-472C-ABFE-1D67B7E0255A by Rballjunkie Smith, on Flickr

51002128819_4d578331f2_b.jpg IMG_7672 2 by Rballjunkie Smith, on Flickr


51087146412_09fe06e35e_b.jpg IMG_7673 2 by Rballjunkie Smith, on Flickr


Luckily, I found an old, unused 120V outlet buried behind a wall. Bingo! Don't have to hire an electrician to run a dedicated circuit. I decided to add a GFCI for more protection. Knowing this will be a heavy tank, decided to go with steel for the stand and supports for the existing corian top. I could have drilled the top but decided against it. It's easier to patch sheetrock than it is to patch hard counters. Thru the wall it is. For the stand, i wanted two sided access with one side 100% open. the front access supports match the door openings. The back access is fully open. To accomplish this, i decided to header the top support with a total of 4.5" of tubular steel.

There's 1-1/2" runners going across the short way of the tank for additional support.

My welding skills suck however I am an expert grinder.

51087055231_46d24697ca_b.jpg IMG_7728 by Rballjunkie Smith, on Flickr


51087146782_577cdcc72c_b.jpg IMG_7759 by Rballjunkie Smith, on Flickr

51087146812_7222c0911f_b.jpg IMG_7758 by Rballjunkie Smith, on Flickr

51002129159_b75a36348b_b.jpg IMG_7757 by Rballjunkie Smith, on Flickr

51017870725_f00a03f787_b.jpg IMG_7756 by Rballjunkie Smith, on Flickr

51087146927_9af27f0711_b.jpg IMG_7755 by Rballjunkie Smith, on Flickr

51083601368_fd85927318_b.jpg IMG_7753 by Rballjunkie Smith, on Flickr


51002129444_36dc70369d_b.jpg IMG_7749 by Rballjunkie Smith, on Flickr
 

Attachments

  • 1600f2a81c8918.gif
    1600f2a81c8918.gif
    620.9 KB · Views: 15

RR-MAN

Supporting Member
Joined
Aug 18, 2003
Messages
5,690
Reaction score
1,222
Location
Pearland
Welcome back to marsh and to pearland- you are pretty close by me. We are neighbors.

Great progress - love the tank dimensions
 
OP
OP
R-BallJunkie

R-BallJunkie

Supporting Member
Joined
Aug 2, 2006
Messages
1,521
Reaction score
235
Location
Latitude N 8° 43' Longitude E 167° 44' , RMI
Some fabrication shots, top header of and cabinet side supports. Had to make temporary supports while fabricating since this stand is in compression rather than welded to the interior members. two 1-1/2" rectangular tubes were welded together, along with the 1-1/2" runners provide the 4-1/2" of steel to support the open side. The cabinet side has more "legs" to distribute the weight. Although this tank should be up and running for years, wanted to have the option to convert back into a cabinet area, reclaim the drawers and doors.

51087055046_be6aebcfa5_b.jpg

51087146532_811d64108e_b.jpg

51017870430_7083152743_b.jpg

51083601158_c1fc4d534d_b.jpg

51083601393_1b7218a3e8_b.jpg


51087146782_bb02bbe867_b.jpg
 
OP
OP
R-BallJunkie

R-BallJunkie

Supporting Member
Joined
Aug 2, 2006
Messages
1,521
Reaction score
235
Location
Latitude N 8° 43' Longitude E 167° 44' , RMI
I painted the interior with several coats of waterproofing paint.....hopefully, will avoid or contain anything minor mishaps.


51087055516_0e94fb62e8_b.jpg

Next on the list is how to mount this beast of a light...the Phillips Coralcare Gen 2. this thing is ungodly heavy...tipping the scales at 15 pounds. This light coming down and crashing into the tank is what nightmares are made of. I decided to try my hand at aluminum extrusion parts to mount the light. I wanted to have a light that could be moved up and down for maintenance as well as a 'hood' to deter all those who wanna taste the carpet. No fish jerky please. I purchased a single motor pedestal "raised desk" table to raise and lower the light. The canopy dimensions match the tanks dimensions perfectly, so when lowered, provide excellent coverage to keep all inhabitant inside the tank. I also made the panels removable in case i needed additional access inside the tank.


51087042231_63b73a0d86_b.jpg

51083587718_0879b4a89d_b.jpg


51002115824_dc2fa87280_b.jpg


51017857545_a9e8d2f5f5_b.jpg

51002115629_2c81a635f8_b.jpg

51017857295_4812c75b4f_b.jpg


51002115244_81f94fb5b6_b.jpg

51002115354_0df03a60c9_b.jpg

51017857225_434a74459a_b.jpg

51002115244_81f94fb5b6_b.jpg

Next.....Tank pick up.......

51017871120_0d29aa96c1_b.jpg
 

Cody

Vice President
Staff member
Administrator
Moderator
Content Moderator
Board Member
Supporting Member
Joined
Jul 23, 2014
Messages
7,284
Reaction score
4,254
Location
Spring, TX
Yokwe and Aloha. After 25 years of aquarium keeping, i decided to take a break from reefkeeping after departing the Marshall Islands where I lived for five years.


It was a great experience living there having the ability to collect both corals and fish for my aquarium over the span of five years. I have to say, you really learn a lot when the Ocean is your local fish store. But alas, all things must come to an end. I thought about starting a new tank when i moved to the Middle East but after perusing a couple of LFS in Doha Qatar, decided against doing so given the poor selections available. Fast forward to this year, decided to get back into the game since amiss from 2015. Anyways, here's my journey back into the reefkeeping foray after a 6 year absence.

Build overview:

36x24x24 Rimless Planet Aquarium
Exotic Marine 20" Overflow Kit
Philips CoralCare Gen2 LED Light Fixture
Bubble Magus Roller Filter medium
Maxspect JUMP Protein Skimmer
2x IceCap 2K Gyre Flow Pump With Dual Pump WiFi Controller
Coral Box DCA12000 return pump
Aqueon Standard Glass Aquarium Tank 40 Gallon Breeder Sump
Jacks Rax DIY baffle kit
Marine Magic - TURF ATS
DIY Electric light raising
Stenner AWC pump 170 DM5
HydroFill Water Reservoir 15G, for AWC
AQUATICLIFE RODIw/ booster pump
Profilux Level Sensor, float & Optical for ATO
ProfiLux 4 Controller
ProfiLux KH Director
GHL Doser 2.1 SA

When I purchased my new to me house in 2019....had some minimum criteria....room for my doggy and perhaps a nice spot for a new aquarium. Check and check, perfect house. The new tank will be going where a 'wet bar' was installed previously meaning there's running water and a drain underneath the cabinetry. Perfect Perfect Perfect.



My end goal is low maintenance, self contained. I don't want to see or touch a orange home depot bucket.

Fortunately for me, i work in building automation so i have a heads up on at least conceptualizing what i want to do as for being the ultimate lazy reefer.

Some demo pics to get this thread started.

51087146292_61480d61fe_k.jpg IMG_7657 by Rballjunkie Smith, on Flickr


51087146252_1c1cae52d2_k.jpg IMG_7656 by Rballjunkie Smith, on Flickr



51083600763_8dbb81f6f5_k.jpg IMG_7660 by Rballjunkie Smith, on Flickr


51002128749_0a1c3c0524_b.jpg IMG_7659 by Rballjunkie Smith, on Flickr

51002128784_4ab27f049d_b.jpg 63010048046__3E087D17-D6B3-472C-ABFE-1D67B7E0255A by Rballjunkie Smith, on Flickr

51002128819_4d578331f2_b.jpg IMG_7672 2 by Rballjunkie Smith, on Flickr


51087146412_09fe06e35e_b.jpg IMG_7673 2 by Rballjunkie Smith, on Flickr


Luckily, I found an old, unused 120V outlet buried behind a wall. Bingo! Don't have to hire an electrician to run a dedicated circuit. I decided to add a GFCI for more protection. Knowing this will be a heavy tank, decided to go with steel for the stand and supports for the existing corian top. I could have drilled the top but decided against it. It's easier to patch sheetrock than it is to patch hard counters. Thru the wall it is. For the stand, i wanted two sided access with one side 100% open. the front access supports match the door openings. The back access is fully open. To accomplish this, i decided to header the top support with a total of 4.5" of tubular steel.

There's 1-1/2" runners going across the short way of the tank for additional support.

My welding skills suck however I am an expert grinder.

51087055231_46d24697ca_b.jpg IMG_7728 by Rballjunkie Smith, on Flickr


51087146782_577cdcc72c_b.jpg IMG_7759 by Rballjunkie Smith, on Flickr

51087146812_7222c0911f_b.jpg IMG_7758 by Rballjunkie Smith, on Flickr

51002129159_b75a36348b_b.jpg IMG_7757 by Rballjunkie Smith, on Flickr

51017870725_f00a03f787_b.jpg IMG_7756 by Rballjunkie Smith, on Flickr

51087146927_9af27f0711_b.jpg IMG_7755 by Rballjunkie Smith, on Flickr

51083601368_fd85927318_b.jpg IMG_7753 by Rballjunkie Smith, on Flickr


51002129444_36dc70369d_b.jpg IMG_7749 by Rballjunkie Smith, on Flickr
Wait wait wait.....how the hell did someone “bury” an outlet in the wall?!! That’s crazy!
 

Cody

Vice President
Staff member
Administrator
Moderator
Content Moderator
Board Member
Supporting Member
Joined
Jul 23, 2014
Messages
7,284
Reaction score
4,254
Location
Spring, TX
And I like your DIY approach. I built my fish room and your sentiment about welding and sanding is the same about mine and drywall. Slap it on thick, and grind that crap down!
 

BigRick

OG Reefer
Supporting Member
Member Spotlight Contest Winner
Joined
Dec 22, 2009
Messages
2,758
Reaction score
1,440
Location
Cypress- Bridgeland
Slap it on thick, and grind that crap down!
:1zhelp:
Popcorn welding will not hold. You gotta melt the the two together and fill up the gap... if ya need any mig/tig I can do... haven't done much welding since racing days... building turbo kits, roll cages, custom this, custom that Yada yada....u know how we roll .. can't stop... won't stop... can u tell im bored! Fine I'm going to bed now... im sleeping in.. get your good Friday sales bought/sold before I wake up...
 
Last edited:

RR-MAN

Supporting Member
Joined
Aug 18, 2003
Messages
5,690
Reaction score
1,222
Location
Pearland
:1zhelp:
Popcorn welding will not hold. You gotta melt the the two together and fill up the gap... if ya need any mig/tig I can do... haven't done much welding since racing days... building turbo kits, roll cages, custom this, custom that Yada yada....u know how we roll .. can't stop... won't stop... can u tell im bored! Fine I'm going to bed now... im sleeping in.. get your good Friday sales bought/sold before I wake up...

Are you up for a challenge?

Need a 10 X 4 metal stand build
 
OP
OP
R-BallJunkie

R-BallJunkie

Supporting Member
Joined
Aug 2, 2006
Messages
1,521
Reaction score
235
Location
Latitude N 8° 43' Longitude E 167° 44' , RMI
:1zhelp:
Popcorn welding will not hold. You gotta melt the the two together and fill up the gap... if ya need any mig/tig I can do... haven't done much welding since racing days... building turbo kits, roll cages, custom this, custom that Yada yada....u know how we roll .. can't stop... won't stop... can u tell im bored! Fine I'm going to bed now... im sleeping in.. get your good Friday sales bought/sold before I wake up...
umm, you aren't supposed to zoom in on the pictures. LOL. Yes, the welds started off horribly, couldn't get penetration, ended up tossing quite a few pieces and no, this is not the complete toss pile.

51091190265_52aac0765b_b.jpg

I stopped and got a different wire and wow, at least penetration.

51087146607_2f5efc2d6e_b.jpg

This is the reason for many of the double gussets used. Overall, yes I 100% agree, welds could be much better....no buttery fillets here. As mentioned before, everything is in compression on the stand, not relying on my crap welds.
 
OP
OP
R-BallJunkie

R-BallJunkie

Supporting Member
Joined
Aug 2, 2006
Messages
1,521
Reaction score
235
Location
Latitude N 8° 43' Longitude E 167° 44' , RMI
Wait wait wait.....how the hell did someone “bury” an outlet in the wall?!! That’s crazy!
The house was built in 1985....back in the heydays of wall to wall shag carpeting, california king waterbeds and wetbars.....Yes, the outlet was probably on the wall, pre-remodel when the formica was removed in lieu of the corian top. The water and drain was abandoned in place.
 
OP
OP
R-BallJunkie

R-BallJunkie

Supporting Member
Joined
Aug 2, 2006
Messages
1,521
Reaction score
235
Location
Latitude N 8° 43' Longitude E 167° 44' , RMI
New tank. Undrilled 36x24x24 Rimless Planet Aquarium with single side starphire.

Overall, impressed with the build quality. Not exactly reef saavy but then again a fifth the price and reasonable build time.

51017871165_5173cbc842_b.jpg

51087147432_1b870bd68e_b.jpg


The tank will be positioned as a peninsula style tank. I've never setup a tank as such. Now realizing since viewed from both sides.....more 'scaping to fill.

I opted for a Exotic Marine 20" Overflow Kit.....unfortunately i didnt take any photo's while drilling the tank, but you seen one tank being drilled, you seen them all. I wanted to do something different with the tank by elevating the liverock off the bottom of the tank to allow for swim thru and a quiet area for the lower light species in the tank. Some of the fish in the tank are deeper water species.


Glass insert being installed, with live rock on the bottom

51087041466_3b97094aee_b.jpg


51087041411_e087ab3792_b.jpg

51087056341_c4796d9096_b.jpg

51017871640_cffc9147ab_b.jpg

51083602348_ec6a1981d5_b.jpg
 
OP
OP
R-BallJunkie

R-BallJunkie

Supporting Member
Joined
Aug 2, 2006
Messages
1,521
Reaction score
235
Location
Latitude N 8° 43' Longitude E 167° 44' , RMI
First pass, dry fitting. Opted for starting this tank with Caribsea Liferock and smaller dry rock pieces....after looking at arrangement options, decided to have two larger pieces on end and an open area in the middle with some branched extensions, It took awhile to find the right combination of flat pieces but overall, think i have good coverage. I pulled out all the LR after the dry fitting and added many holes to match the acrylic rod diameter to give options to insert pieces here and there. Some of this rock was hard to drill, especially the smaller pieces. took some patience but did end up with some rubble due to breakage.



51087056576_2ef9ce2f4f_b.jpg
 
Top