• Welcome back Guest!

    MARSH is a private reefing group. Comments and suggestions are encouraged, but please keep them positive and constructive. Negative threads, posts, or attacks will be removed from view and reviewed by the staff. Continually disruptive, argumentative, or flagrant rule breakers may be suspended or banned.

Di Resin (1 Viewer)

Stickboy97

Supporting Member
Joined
Dec 13, 2009
Messages
673
Reaction score
640
Location
Humble & Conroe, TX
So who here refills their own Di Resin? What do you use? I'm tired of constantly replacing my DI cartridge so I'm finally going to fill my own.

But There are so many brands out there... and types...

I do want a color change resin, so I will know when to start watching for an increase in TDS.

thx
 

frankc

Supporting Member
Build Thread Contributor
Joined
Jun 11, 2012
Messages
1,138
Reaction score
947
Location
The Woodlands
I just use the basic mixed resin from BRS. I have used the color changing, but I haven't found it to be very accurate. Sometimes the color would change but I would still get 0 TDS for a long time, and the most recent time I was getting 2 TDS even though most of the resin was still blue.
 
OP
Stickboy97

Stickboy97

Supporting Member
Joined
Dec 13, 2009
Messages
673
Reaction score
640
Location
Humble & Conroe, TX
Been doing some looking around and see decent reviews of the BRS stuff but I see some AquaticLife on Amazon (the devil) with pretty good reviews as well. Plus I can buy bulk.
 

Ostentum

Supporting Member
MARSH Secret Santa 2020
Build Thread Contributor
Joined
Jul 12, 2006
Messages
2,263
Reaction score
297
Location
Porter, TX
I only buy the one use packages from BRS. I bought in bulk once and if you don’t get a good seal back on the bag it degrades like after 50g of water it’s toast. Now I use the 7 stage with the 3 stages of resin and just use the single pouch refill kits
 
OP
Stickboy97

Stickboy97

Supporting Member
Joined
Dec 13, 2009
Messages
673
Reaction score
640
Location
Humble & Conroe, TX
I was wondering about that. I go through a new cartridge every 2 months (hard water at the office). So I was gonna buy bulk, to save money.... but don't want it going to waste. I guess I could use my vacuum sealer to close it up.
 

Cody

Vice President
Staff member
Moderator
Content Moderator
Board Member
Supporting Member
Joined
Jul 23, 2014
Messages
6,121
Reaction score
3,444
Location
Spring, TX
I only buy the one use packages from BRS. I bought in bulk once and if you don’t get a good seal back on the bag it degrades like after 50g of water it’s toast. Now I use the 7 stage with the 3 stages of resin and just use the single pouch refill kits
Yeah I ordered the larger quantity from BRS assuming it was just multiple of the single use sealed ones. I wasn't.
 

Tenny

Supporting Member
Build Thread Contributor
Joined
Jul 18, 2018
Messages
743
Reaction score
630
Location
League City

Users who are viewing this thread

Top