• Welcome back Guest!

    MARSH is a private reefing group. Comments and suggestions are encouraged, but please keep them positive and constructive. Negative threads, posts, or attacks will be removed from view and reviewed by the staff. Continually disruptive, argumentative, or flagrant rule breakers may be suspended or banned.

Looking for external overflow box (1 Viewer)

Users who are viewing this thread

Carrie17

Supporting Member
Joined
Oct 15, 2013
Messages
157
Reaction score
25
Does anyone know where I could get the external box to an overflow kit? If prefer not to have to drill the tank, so it needs to have only one bulkhead from the tank. Also, I'd like at least 2 drain bulkheads.
Thanks!
Carrie
3b7bc14b428e65214eb1e0a86c0ed384.jpg


Sent from my moto z4 using Tapatalk
 
OP
OP
Carrie17

Carrie17

Supporting Member
Joined
Oct 15, 2013
Messages
157
Reaction score
25
So I ordered
But the hole is much bigger than I expected. The outside dimensions of my bulkhead is about 1.5", and the product lists a 1.5" bulkhead in the description, but I guess that's inside dimension, cause the hole in the outer box is huge! Should I return this and look for another, or could I use a gasket to make up the difference?
19d45eaa5b511b1aa7897bb479d8bb32.jpg
40c3f26c1e5e168e87dd37d9e0036c97.jpg
77d4b0c6fe468c9fc53babecee48e659.jpg
5376c54c6db51fa2f1664c283dd1b275.jpg


Sent from my moto z4 using Tapatalk
 

ShipWrecked

Guest
Joined
Feb 11, 2019
Messages
147
Reaction score
136
Location
Alvin
So I ordered
But the hole is much bigger than I expected. The outside dimensions of my bulkhead is about 1.5", and the product lists a 1.5" bulkhead in the description, but I guess that's inside dimension, cause the hole in the outer box is huge! Should I return this and look for another, or could I use a gasket to make up the difference?
19d45eaa5b511b1aa7897bb479d8bb32.jpg
40c3f26c1e5e168e87dd37d9e0036c97.jpg
77d4b0c6fe468c9fc53babecee48e659.jpg
5376c54c6db51fa2f1664c283dd1b275.jpg


Sent from my moto z4 using Tapatalk
I could 3d print an adapter and you could make a gasket.

Sent from my SM-G892A using Tapatalk
 
OP
OP
Carrie17

Carrie17

Supporting Member
Joined
Oct 15, 2013
Messages
157
Reaction score
25
I could 3d print an adapter and you could make a gasket.

Sent from my SM-G892A using Tapatalk
Thanks! That would be great! I can get you the measurements tonight.

Sent from my moto z4 using Tapatalk
 
OP
OP
Carrie17

Carrie17

Supporting Member
Joined
Oct 15, 2013
Messages
157
Reaction score
25
Thanks! I think I've found a suitable combination of seals. One is a toilet seal but I think it should be ok? It has a small hole, but a wide ring.

Sent from my moto z4 using Tapatalk
 
Top