• Welcome back Guest!

    MARSH is a private reefing group. Comments and suggestions are encouraged, but please keep them positive and constructive. Negative threads, posts, or attacks will be removed from view and reviewed by the staff. Continually disruptive, argumentative, or flagrant rule breakers may be suspended or banned.

Replacing inner seal on a 200 (1 Viewer)

Users who are viewing this thread

KyndalAg08

Guest
Joined
Dec 31, 2017
Messages
15
Reaction score
0
Location
Vidor
Looking at picking up a 200 locally, I'm concerned about the condition of the front inner seal. I think the tank is 6 or 7yrs old, and the edges are looking a bit ragged. The structural seals appear solid, and the tank is full and partially running ( long explanation, the pumps are going at any rate) as we speak.

Has anyone done an internal reseal on one this size? The deal is not beyond amazing, but is pretty decent tbh, and it would fit perfectly in the slot I have for it. I have no desire to take the tank completely apart and attempt the structural seams, I'd buy a different tank well before then.
 

TooSalty

Supporting Member
Joined
Aug 22, 2008
Messages
125
Reaction score
9
Location
Katy
its not hard, but its a lot of work. buy a pack of 100 razor blades, razorblade holder, and a spray bottle. Buy momentive RTV silicone to reseal. Use painters tape before you re-silicone if you want nice straight lines.
 
Top