• Welcome back Guest!

    MARSH is a private reefing group. Comments and suggestions are encouraged, but please keep them positive and constructive. Negative threads, posts, or attacks will be removed from view and reviewed by the staff. Continually disruptive, argumentative, or flagrant rule breakers may be suspended or banned.

Sulfur Denitrators (1 Viewer)

Users who are viewing this thread

sneezebeetle

Treasurer
Staff member
Moderator
Board Member
Supporting Member
Joined
Jul 9, 2015
Messages
5,525
Reaction score
1,899
Location
Houston, TX
I am one of those hobbyists who has always struggled with high nitrate levels (50ppm or higher). I have gone through 7 tank upgrades and/or additions and I have struggled with this in ALL of them. While there are plenty of hobbyists whose tanks thrive at these levels, and plenty of claims that its "just a number", I am forever trying to get my levels down. If there has been a recommendation, I have tried it! My latest quest to lower my nitrate level has brought me to discover a little doo-dad called a Sulfur Denitrator ( Sulfur nitrate reactors. ).

"Sulphur based nitrate reactors implement a process called autotrophic sulfur denitrification. For over 10 years this process has been used to remove excess nitrate from fresh drinking water. Bacteria such as Thiobacillus denitrificans and Thiomicrospira denitrificans inhabit the reactor, under anoxic conditions. Here they oxidize reduced sulfur to sulfate, while reducing nitrate to liberate the oxygen for their own use. These bacteria use residual co2 within the water as their carbon source, so they don’t need constant dosing. This process was applied to seawater on a mass scale in 1994, when French chemist Marc Langouet proposed the idea to the curator of Musée des Arts Africains et Océaniens in Paris (MAAO). Langouet had spent three years testing the method on his own home marine aquariums, and after a broad range of testing at MAAO, the method was put into place as an effective way to rid marine water of nitrate.

Sulfur nitrate reactors use small beads of elemental sulfur in a contact chamber. Water is introduced at the bottom of the chamber very slowly, exiting at the top. As the water slowly rises, oxygen is removed, making the water anaerobic farther up in the contact chamber. At this point, bacteria will use nitrate in the absence of oxygen and by the time the water exits the reactor, most of the nitrate has been removed. The downside to this chemical reaction is that hydrogen ions are released, which makes the seawater more acidic. Most sulfur reactors pass water over crushed coral before returning it to the tank, as the acidic water dissolves the crushed coral and replenishes ph and calcium. Since sulfate is another bi-product of the chemical reaction within the reactor, crushed coral also absorbs this and removes it before water re-enters the aquarium."

After doing some more reading up on this, I think I may give it a shot.

Has anyone else tried this? What was your experience?

Sent from my SM-G960U using Tapatalk
 

steveb

Staff member
Administrator
Moderator
Board Member
Build Thread Contributor
Joined
Jun 24, 2009
Messages
11,953
Reaction score
2,856
Location
Spring
You need to be careful with sulfur denitrators. They can produce hydrogen sulfide I believe if the flow is too slow.

Read up on them. Not saying the don't work. They do. Just understand the risks of using one.
 
OP
OP
sneezebeetle

sneezebeetle

Treasurer
Staff member
Moderator
Board Member
Supporting Member
Joined
Jul 9, 2015
Messages
5,525
Reaction score
1,899
Location
Houston, TX
You need to be careful with sulfur denitrators. They can produce hydrogen sulfide I believe if the flow is too slow.

Read up on them. Not saying the don't work. They do. Just understand the risks of using one.
For sure!

Sent from my SM-G960U using Tapatalk
 

kris4647

Supporting Member
Joined
Apr 15, 2003
Messages
838
Reaction score
358
Location
Seabrook
Saw this a few weeks ago, AE makes really solid stuff.



Sent from my iPhone using Tapatalk
 
OP
OP
sneezebeetle

sneezebeetle

Treasurer
Staff member
Moderator
Board Member
Supporting Member
Joined
Jul 9, 2015
Messages
5,525
Reaction score
1,899
Location
Houston, TX
Found a good video from Parker's Reef on you tube. On figuring out dosing amounts, flow, etc..just need to convert from metric



Sent from my SM-G960U using Tapatalk
 
OP
OP
sneezebeetle

sneezebeetle

Treasurer
Staff member
Moderator
Board Member
Supporting Member
Joined
Jul 9, 2015
Messages
5,525
Reaction score
1,899
Location
Houston, TX
I noticed on the thread from ReefCentral, Coil denitrators were also discussed. I've never heard of those before, them seem pretty old school. Anyone have any experience with using or building one of those?

Sent from my SM-G960U using Tapatalk
 
OP
OP
sneezebeetle

sneezebeetle

Treasurer
Staff member
Moderator
Board Member
Supporting Member
Joined
Jul 9, 2015
Messages
5,525
Reaction score
1,899
Location
Houston, TX
Ive been running 1 from day 1. Use to run 2 of them but nitrates were zero and my corals were hungry so i turned one off.
The sulfur or coil denitrator?

Sent from my SM-G960U using Tapatalk
 
OP
OP
sneezebeetle

sneezebeetle

Treasurer
Staff member
Moderator
Board Member
Supporting Member
Joined
Jul 9, 2015
Messages
5,525
Reaction score
1,899
Location
Houston, TX
I have almost a whole container of the sulfer media. Let me know if you want it

Sent from my SM-G973U using Tapatalk
Hey Corey, long time no see! Hope all is well and thanks!

Sent from my SM-G960U using Tapatalk
 
OP
OP
sneezebeetle

sneezebeetle

Treasurer
Staff member
Moderator
Board Member
Supporting Member
Joined
Jul 9, 2015
Messages
5,525
Reaction score
1,899
Location
Houston, TX
My tank started leaking, so everything I have is in a Rubbermaid horse trough. I need to reseal my 180 or get another tank. I have not been as active lately because of that.

Sent from my SM-G973U using Tapatalk
Oh wow, sorry to hear that!

Sent from my SM-G960U using Tapatalk
 

TX_Punisher

Supporting Member
Joined
Jan 12, 2013
Messages
669
Reaction score
514
Location
South Houston
What size was your bio pellet reactor? How many cups of pellets? How long was the media ran? Bio pellets do take some time to start working.

I’ve got one that worked too well in my tank sitting around. 8CC81E4C-82FE-422E-975B-E8C6A3712C00.png
 
Top