Trident help (1 Viewer)

[alstang1]

I’ve tried every button, and extended menu button. I’ve searched the web and YouTube. I’ve looked for search features in apex app. I can not locate this task anywhere.

Can someone please help me tell trident that it’s waste container has been emptied??

 

[TX_Punisher]

In the trident tile click on the gear. Then click on trident at the bottom.

once in the trident control screen click on the reset tab and you can reset the waste container from there.

 

[Reefahholic]

You CaRx media melting point is low.
What media do you currently have in that reactor?

 

[TX_Punisher]

ARM. It’s dialed in finally to my needs.

 

[Reefahholic]

ARM. It’s dialed in finally to my needs.

Man, we need a media that dissolves really well at 6.9 Like enough to meet the needs of a growing acro tank w/o having to go down to 6.7, 6.5, 6.4, 6.2.

I hate dumping so much CO2 in my tank which is why I’d never run Triton’s media.

 

[alstang1]

In the trident tile click on the gear. Then click on trident at the bottom.

once in the trident control screen click on the reset tab and you can reset the waste container from there.

I appreciate it. I was all up in that menu and just couldn’t realize that selecting and then saving was all that was needed. Sounds almost to simple to work.

 

[Ostentum]

Man, we need a media that dissolves really well at 6.9 Like enough to meet the needs of a growing acro tank w/o having to go down to 6.7, 6.5, 6.4, 6.2.

I hate dumping so much CO2 in my tank which is why I’d never run Triton’s media.

I have no ph issues using it in my dastaco. It’s all about the reactor

 

[Reefahholic]

I have no ph issues using it in my dastaco. It’s all about the reactor

Maybe I need to try a Dastaco the next time. Right now I have another GEO 618 with secondary chamber the same size. Haven’t even unboxed it. Maybe I should do that tonight. Need to get a look at it. Could be broke.

 

[Reefahholic]

My friend in Corpus says that you have to run the reactor a certain way to make it more efficient. He has some kinda hose modification that he swears by.

 

[Reefahholic]

What do you suspect my problems are with the GEO?

I’ve had the pH settings set tight and slightly loose. Both seemed about the same. Usually within a variance of about 0.1. Do you think the shorter variance makes it dump more CO2 (probably so).? Should I move it up to 0.5 or so? Really don’t want it to swing more than about 0.5 dKH. Maybe I should just take it off the controller all together and just test by effluent dKH.

 

[TX_Punisher]

I don’t have ph problems. In fact, it’s often high with the skimmer off 12hrs when lights go on.

 

[Reefahholic]

I don’t have ph problems. In fact, it’s often high with the skimmer off 12hrs when lights go on.

Depends on your square footage too. My places are likely much smaller than both of you.

When you say high…what number are we taking about.?

Are you running Kalk and CO2 scrubber?

 

[TX_Punisher]

8.5. Some kalk. 150ml/day.

co2 scrubber only at night. Low ph at night of 8.15-8.2

 

[Reefahholic]

8.5. Some kalk. 150ml/day.

co2 scrubber only at night. Low ph at night of 8.15-8.2

There you go. Kalk and CO2 scrubber.

Pull those bad boys off and watch it drop!