thangbom4321
Guest
So mad I am!! I took apart the carb on my 2006 Johnson 9.9 outboard and cleaned her up really good. I then ran out to the auto part store to get 2 new spark plug and swapped those out, hooked up the water muffler and turned on the water, hook up the gas tank, pumped the priming bulb a few times and gave her a few pulls. She started up with a few splutters but ran. I looked at the water pump outlet hole (some people call it the pee hole) and nothing was coming out so I shut her down after 30 seconds of her running. I saw a trail of fire-ants crawling out from my lower unit so I cursed at them!! It made me feel a little better but they did not seem to care as they were busy carrying there larva to safety. I removed the lower unit and opened the water-pump housing. It was clean and the impeller looked good so I reassembled it. I then went and "snaked" the water hose from the bottom up then from the outlet down and all seemed clear. I guess there was only a little but of blockage. Anyhow, I reassembled everything, put mufflers back on, turned on the water, and gave her a few pulls. I get a few put put put and that's it! I opened the drain on the carb's bowl and gas runs out. I gave her a dozen more pulls and same thing. Angry and hot I left her alone for 2 days.
Today, I was really wanting to go fishing so I took the carb apart again, cleaned her again, and reinstalled her. I gave her a few dozen pulls and still just a few put puts. I removed the spark plugs and pulled her a few times, I head the click click so I'm guessing I'm getting ignition (I cant see and sparks) so I reinstalled those too. I'm pretty handy but this is the limit of my abilities.
**Anyone know a thing or two on 2 stroke engines that could give me a hand? If someone can come over that would be great but I could even bring the whole thing to your place to see if we can get her to run. **
Today, I was really wanting to go fishing so I took the carb apart again, cleaned her again, and reinstalled her. I gave her a few dozen pulls and still just a few put puts. I removed the spark plugs and pulled her a few times, I head the click click so I'm guessing I'm getting ignition (I cant see and sparks) so I reinstalled those too. I'm pretty handy but this is the limit of my abilities.
**Anyone know a thing or two on 2 stroke engines that could give me a hand? If someone can come over that would be great but I could even bring the whole thing to your place to see if we can get her to run. **