Pure Magic
Guest
I’ve been using a three channel Bubble Magus BM-T01 dosing pump for about 8 months. It is a great dosing pump but lately it has been blowing the tubes off the individual pumps. Then the chemicals I am dosing go all over the floor and make a mess.
I spoke to Dennis from FJW Aquariums about the tubing coming off and he recommended I put zip ties on the tubing. So I did. No problems since which it has been about 4 days. Thank you Dennis!
Here are some pictures of the spill which were occurring from my part “B” and mag pump lines:
The space under my tank is very tight. The chemicals and dosing pump is located behind my ATO bucket.
I cleaned up the wood on the stand and the floor.
Here are the zip ties on the tubing:
I wanted to post this just in case others are having this problem. Hope this helps.
I spoke to Dennis from FJW Aquariums about the tubing coming off and he recommended I put zip ties on the tubing. So I did. No problems since which it has been about 4 days. Thank you Dennis!
Here are some pictures of the spill which were occurring from my part “B” and mag pump lines:
The space under my tank is very tight. The chemicals and dosing pump is located behind my ATO bucket.
I cleaned up the wood on the stand and the floor.
Here are the zip ties on the tubing:
I wanted to post this just in case others are having this problem. Hope this helps.