huntmarlin
Guest
- Joined
- Aug 14, 2011
- Messages
- 49
- Reaction score
- 0
ok so I decided to post a my build on line I am taking down my 65 (48l x18d x18h) and up grading it to a 90 gallon rimless(48l x 18d x 24 h). I have custom built the cabinet into my wall so the 90 rimless will work perfect. I will have 3 Ai led's on this tank I am also going to add a reef keeper rke with the net, also I am installing 3 water sensors. one for the sump one for the ro/di unit and one for the salt and fresh holding tanks. I am going to build my own led light with 13 led’s for my 20 gallon sump. can’t wait for it to get here. also I can’t wait for the rke to get here. I wired the wires for the net and the water sensors to day getting ready for the rke to get here wed. I also installed . I will take picks here latter. I also plan to hook up my ro/di filter to 2 holding tanks one 25 gallon for fresh water and a 35 gallon for salt water changes. I plan for this to be gravity feed to the ato and a valve system for salt water changes. while I’m at it I also plan to run a waste water line from the tank to the sink where my ro/di system will be located, that way I can hook up a small whisper pump and pump out water for water changes and open a valve for new salt water to come in.
the new tank I have changed around a little bit since it is now 24 tall it will hide my over flow and all my probes since the viewing area is 19" since it is a rimless I had them put the over flow 1" lower than they usually do. also this should help when wiping down the glass and when I have 1 mp 40 and one mp 10 rocking so that the water will have some sloshing room. I also moved the over flow from the left side to a center box hoping to improve flow. ??? I also plan on painting the back of the tank black .
really excited to see it all come together
this should be sweet .
the new tank I have changed around a little bit since it is now 24 tall it will hide my over flow and all my probes since the viewing area is 19" since it is a rimless I had them put the over flow 1" lower than they usually do. also this should help when wiping down the glass and when I have 1 mp 40 and one mp 10 rocking so that the water will have some sloshing room. I also moved the over flow from the left side to a center box hoping to improve flow. ??? I also plan on painting the back of the tank black .
really excited to see it all come together
this should be sweet .