G
Guest
I have a extra "sump". It is an acrylic box, 20x12.25x18, made by CPR out of 1/4 inch acrylic, the lid is black acrylic.
It looks like the sump side for this
except nothing has been drilled.
I'd make it into a nano, but it has this annoying 3 inch wide acrylic brace set vertically near the top of the tank. In ASCII art, the tank looks like this:
Edit:I am the suxxors at ascii art. I'll upload a drawing:
So here are my thoughts. I could cut it down to 12 inches tall, discarding the brace section.
but then it would be easier to just spend 20 bucks to buy a 20 gallon.
Or I could ignore the brace and fill it with water anyway, knowing that eventually it will become a coralline "wall" in the middle of the tank
Or I could let it collect dust in my office for another 6 months.
what would you do?
It looks like the sump side for this
except nothing has been drilled.
I'd make it into a nano, but it has this annoying 3 inch wide acrylic brace set vertically near the top of the tank. In ASCII art, the tank looks like this:
Edit:I am the suxxors at ascii art. I'll upload a drawing:
So here are my thoughts. I could cut it down to 12 inches tall, discarding the brace section.
but then it would be easier to just spend 20 bucks to buy a 20 gallon.
Or I could ignore the brace and fill it with water anyway, knowing that eventually it will become a coralline "wall" in the middle of the tank
Or I could let it collect dust in my office for another 6 months.
what would you do?