Sump (1 Viewer)

[cleaner72]

I picked tgis sump up on craigslist....anyone have an idea what brand it might be? I am just trying to figure out how to configure it. I know the pump will go on the side of the bulkhead, but two of the dividers have "holes" in them. I thought those dividers would be bubble traps, but with the holes, what good is that?



http://img.photobucket.com/albums/v520/cleaner72/20180114-103414.jpg

this ramp on bottom is weird

http://img.photobucket.com/albums/v520/cleaner72/20180114_194149.jpg

bulkhead end

http://img.photobucket.com/albums/v520/cleaner72/20180114_194111.jpg

whats this divider for?

http://img.photobucket.com/albums/v520/cleaner72/20180114_194111.jpg

this is hard to tell but these are two dividers next to pump chamber with "holes" in them

http://img.photobucket.com/albums/v520/cleaner72/20180114_194136_1.jpg

any help would be appreciated.

 

[steveb]

re: two dividers next to pump chamber with holes in them..

sometimes they put a foam block in between the two baffles to trap them.. its really hard to see though from the pictures if the are about 1/4 to 1/3 the height of the sump that would be my thought. I'm not sure if the holes are "original" to the construction or an aftermarket addition.

 

[cleaner72]

somehow I posted this twice, my apologies...and thank you for the info.

 

[webster1234]

I agree with Steve. Really hard to tell from the pictures.

 

[KyndalAg08]

I believe the "ramp" is supposed to be some form of plenum. The dividers may have been for a filter sponge, or some other proprietary equipment.