Where to Buy c channel metal (1 Viewer)

[rparker2112]

I need 6 foot of 6 inch c-channel. I called Triple S and all they have is 20ft. Can tell me where to find a piece or even located me some?

For curious minds I'm making a front bumper for my Jeep Liberty. And yes it's lifted

Sent from my Home Phone using Tapatalk

 

[webster1234]

Are you set on 6" C channel? I need to run by my shop and see what I have but I am pretty sure I have some 2x8 square tubing and some 4x4 square tubing, both of which would be stronger than C channel. I'll go by there tomorrow and let you know what I have if you're interested. Whatever I have, you are welcome to come get.

 

[rparker2112]

Maybe the 2x8 depending on the thickness

Sent from my Home Phone using Tapatalk

 

[webster1234]

I know it's schedule 40. I'll measure the thickness when I go by there. I also think I have some 6" steel tubing if you want a round bumper.

 

[gabe_j]

Check out steel supply cut to order.

 

[webster1234]

Check out steel supply cut to order.

Yea, they're great. They will cut it for you on site so you can haul it home. Not sure if you can buy less than a 20' stick though.

 

[gabe_j]

Err i usually get it for the shop i worked at and sometimes the have extra material you can get if someone had it cut and didn't take the whole thing.

 

[webster1234]

Ok, here's what I have. 2'X4" C channel. I have two 7' sticks and one 5' stick. It is about 1/4" thick. Also have some 3" angle of the same thickness that you could weld together, but you would have a seam down the middle. Probably not what you want. If you want to try the C channel, come get it. Its going to the scrap yard at some point.

 

[rparker2112]

Ok, here's what I have. 2'X4" C channel. I have two 7' sticks and one 5' stick. It is about 1/4" thick. Also have some 3" angle of the same thickness that you could weld together, but you would have a seam down the middle. Probably not what you want. If you want to try the C channel, come get it. Its going to the scrap yard at some point.

Pm sent

Sent from my Home Phone using Tapatalk