• Welcome back Guest!

    MARSH is a private reefing group. Comments and suggestions are encouraged, but please keep them positive and constructive. Negative threads, posts, or attacks will be removed from view and reviewed by the staff. Continually disruptive, argumentative, or flagrant rule breakers may be suspended or banned.

Cyano (1 Viewer)

Users who are viewing this thread

Joined
Aug 31, 2009
Messages
618
Reaction score
39
Location
Live in Katy, Work Galleria area
I seem to have a case of cyano bacteria, is Ultra Life Red Slime Remover a good option?

I am as confident as I can be that it's cyano. Red, goes away with lights out, comes back a few hours after lights back on. Trapped gas under the slime.

I've already decreased nutrients, sucked out the slime daily, done a 3 day black out. All with little to any results.
I used the RSR years ago, it worked well then, although I couldn't use my skimmer for about a month.

Are there other options?

TIA
Joe



Sent from my iPhone using Tapatalk
 

Clownfish Chris

Moved On
Joined
Nov 15, 2014
Messages
1,915
Reaction score
4
Location
Spring 77373
I would dose 1ml/10gallos h2o2, put a wooden airstone in your sump so you get little bubbles in the display, and repeat lights out. Do this all at the same time. Run your skimmer very wet. You should have to dump the cup at least once a day. What you describe may or may not be cyano. This treatment worked well for me to treat dinos. It also wiped out what little cyano I had. If that doesn't work for you, go for the chemical treatment.
 
Last edited:

FarmerTy

Silver Sponsor
Joined
May 4, 2015
Messages
2,206
Reaction score
353
Location
Austin, TX
I would dose 1ml/gallon h2o2, put a wooden airstone in your sump so you get little bubbles in the display, and repeat lights out. Do this all at the same time. Run your skimmer very wet. You should have to dump the cup at least once a day. What you describe may or may not be cyano. This treatment worked well for me to treat dinos. It also wiped out what little cyano I had. If that doesn't work for you, do for the chemical treatment.
Curious, did you mean 1ml/10 gallons of hydrogen peroxide to tank water? I've never done 1:1 like that but I think you'll have some disastrous results with the corals in the tank.
 
Joined
Jun 7, 2015
Messages
364
Reaction score
4
Location
Beltway 8 and Fort Bend Toll Rd.
I have used Red Slime Remover with great success in removing Cyano..... however the problem is it made a major imbalance in the biodiversity of the tank that I had a Dinos infestation that lasted 8 months. I would take the Cyano over Dinos any day. I will never use Reds Slime Remover again!!!
I attribute my Cyano to heavy use of the Selcon addetive. I was using it way too much because my fish loved it so much.
 

PSXerholic

Supporting Member
Joined
Jan 7, 2015
Messages
1,834
Reaction score
23
Location
Cypress
I seem to have a case of cyano bacteria, is Ultra Life Red Slime Remover a good option?

I am as confident as I can be that it's cyano. Red, goes away with lights out, comes back a few hours after lights back on. Trapped gas under the slime.

I've already decreased nutrients, sucked out the slime daily, done a 3 day black out. All with little to any results.
I used the RSR years ago, it worked well then, although I couldn't use my skimmer for about a month.

Are there other options?

TIA
Joe



Sent from my iPhone using Tapatalk

Not familiar with your tank.
FTS and some descripitve info?

I would bring the bacterial biology back on track to be good for the future and not just now.


Otherwise the Hydrogen treatment is safer then any red slime remover products.


-Andre
 
OP
OP
freeswimmingfish
Joined
Aug 31, 2009
Messages
618
Reaction score
39
Location
Live in Katy, Work Galleria area
Thanks all.
The tank is fairly new, about 11 weeks old. It's a 156g, PM 36+ sump, SRO 3000 skimmer, GFO.
135lbs live rock, 120 lbs sand.
I can't seem to post pics via tapatalk, so I'll try when I get home.
The h20h seems like the best option, I'll try that.


Sent from my iPhone using Tapatalk
 

sneezebeetle

Treasurer
Staff member
Moderator
Board Member
Supporting Member
Joined
Jul 9, 2015
Messages
5,526
Reaction score
1,882
Location
Houston, TX
I had a pretty bad case, but didnt want to add anything to my tank. So.....I created (3) 5 gl buckets of fresh salt water. Took each rock out and, using a baby tooth brush, brushed each rock till I was satisfied I got off as much as I could. Then dunked a few times in each bucket for a double rinse and put back in the tank. Then I took out the powerheads, skimmer, heater...any equipment I had in my tank and let them soak in white vinegar and scrubbed them clean followed by air dry. Once I did all this I put everything back in the tank and did a total black out for 5 days then over the next 2 weeks gradually increased the amount of light my tank got until I was back on schedule. That was about 6 or so months ago and it has never returned. During this time I did 10% water changes every 3 days. I dont know what size your tank is, but this all happened in my smaller tank. I understand this may be a bit much if you have a larger tank, but it worked for me. I should also say that I did not dose anything during this time (vitamins, minerals etc) and decreased the amount of food I fed.

Worked for me and I didnt have to add any chemicles to my tank.

What ever route you decide, good luck :)

Sent from my SM-G920V using Tapatalk
 

PSXerholic

Supporting Member
Joined
Jan 7, 2015
Messages
1,834
Reaction score
23
Location
Cypress
Thanks all.
The tank is fairly new, about 11 weeks old. It's a 156g, PM 36+ sump, SRO 3000 skimmer, GFO.
135lbs live rock, 120 lbs sand.
I can't seem to post pics via tapatalk, so I'll try when I get home.
The h20h seems like the best option, I'll try that.


Sent from my iPhone using Tapatalk

Oh geez, that is then just your cycle and you have been a bit too quick with increasing bioload such as adding corals and fish etc. maybe !?
Get us a FTS and lets see the deal.

Best is not to use anything against it, if not a real issue.

I would like to give some good advise in case you go Hydrogen peroxide, but in general try to avoid any of those.

-Andre
 

jqsquared

Guest
Joined
Nov 26, 2012
Messages
561
Reaction score
3
Location
Cypress
I honestly wouldn't even worry too much with a new tank. Just leave it. Should correct itself without too much intervention.
 
OP
OP
freeswimmingfish
Joined
Aug 31, 2009
Messages
618
Reaction score
39
Location
Live in Katy, Work Galleria area
I know this can be part of the cycle process, that's why I didn't worry too much at first.
Last night I took a good look at the display and decided to move my MP40's. They were up pretty high. I lowed them to about 6-7" above the sandbed. I also turned them both up to about 80%. They were about 5" from the top and about 50%. The sand moves but doesn't blow around. I'm hoping this will help.
I also need to add some cheato to my fuge.


Sent from my iPhone using Tapatalk
 

Tangs

Guest
Joined
Apr 27, 2008
Messages
2,010
Reaction score
426
Location
Sarnia, Ontario
Are you using t5 lighting? I used to have lots of Cyano when I was using t5 lighting. Now that my primary lighting is led I no longer have a bad case of the stuff. I do have a bit but rarely do water changes and gives tangs a nice light snack.
 
OP
OP
freeswimmingfish
Joined
Aug 31, 2009
Messages
618
Reaction score
39
Location
Live in Katy, Work Galleria area
With the MP-40's lower in the tank, the cyano doesn't seem to be coming back quiet as thick but it's still there. I'll do a water change this weekend with hopes to help. If it's still strongly present in a few weeks I'll try chemiclean.
For lights, I have 4 T5's (2 blue plus, Aqua Blue special, coral plus) and 2 250w MH (Reeflux 20,000k). All are about 9-10 weeks old.


Sent from my iPhone using Tapatalk
 
OP
OP
freeswimmingfish
Joined
Aug 31, 2009
Messages
618
Reaction score
39
Location
Live in Katy, Work Galleria area
The cyano wasn't all that effected by the lower power heads. It just grew in other spots. I found my dead spots for sure!
I put in chemiclean tonight. Skimmer went crazy, air pump with airstone in the sump.


Sent from my iPhone using Tapatalk
 

PSXerholic

Supporting Member
Joined
Jan 7, 2015
Messages
1,834
Reaction score
23
Location
Cypress
The cyano wasn't all that effected by the lower power heads. It just grew in other spots. I found my dead spots for sure!
I put in chemiclean tonight. Skimmer went crazy, air pump with airstone in the sump.


Sent from my iPhone using Tapatalk

Even if I dislike the route you went, since I would have done the bacterial and biological method first,
keep us updated on any issues you do start to observe after the dosing.

THX and good luck and I hope it turns out well for you.

-Andre
 
OP
OP
freeswimmingfish
Joined
Aug 31, 2009
Messages
618
Reaction score
39
Location
Live in Katy, Work Galleria area
So far, the only issue is my skimmer constantly overflows. I have to leave it off, when I turn it on it spills over in less than 10 seconds.
The cyano is gone so now I can focus on the cause of it, not just the symptom:
Over feeding and flow.


Sent from my iPhone using Tapatalk
 
Top