BrAin
Guest
I'm having TDS issues with my Ro/Di system and looking for some help or guidance. I bought a system off the internet some time ago and added prefilters before the system because I thought this might help. I just replaced all filters, resin, and the membrane to fill the new tank. I've probably ran close to 400 gallons through the new filters and now I'm up to 212 TDS. Input from house is around 600 TDS. Lowest at start was 10 TDS output. All cartridges are from Bulk reef.
Currently running:
one: 5 micron sediment filter
Two: 1 micron sediment filters
One: 5 micron BRS chlorine and VOC carbon
One: 1 micron BRS chlorine and VOC
Two: 1 micron BRS universal carbon
75 gpd RO Dow Filmtec membrane
DI Resin
The universals are supposed to be good for chlorine and chloramine. I put in a flush bypass valve that I open fully on occasion but never let it run very long. Any advice? Thanks
Sent from my XT1650 using Tapatalk
Currently running:
one: 5 micron sediment filter
Two: 1 micron sediment filters
One: 5 micron BRS chlorine and VOC carbon
One: 1 micron BRS chlorine and VOC
Two: 1 micron BRS universal carbon
75 gpd RO Dow Filmtec membrane
DI Resin
The universals are supposed to be good for chlorine and chloramine. I put in a flush bypass valve that I open fully on occasion but never let it run very long. Any advice? Thanks
Sent from my XT1650 using Tapatalk