You gotta admit, you went too hard in the paint not troll you a little bit.
On a serious note. If you need help posting the links let me know and if anybody gets an ATI analysis this will be very helpful for you:
How to share your ATI results, see the data tracking, tank trending, diagrams, etc.
Here are some helpful hints for viewing and sharing your ICP analysis.
Unlock all Data Tracking in the ATI Lab system and review the trending of all your ICP results in a Diagram and share it with others via a link.
First you’ll enable all parameters to be shown on the diagrams:
1. Go to the Lab Dashboard
2. Click the Tank’s name which is slightly blue.
3. Click on the left corner button “Charts” below your tanks element overview rating.
4. Now you see all the Charts as diagrams and you can click each Chart and point and hover over the individual measured values if needed. If you are here for the first time, then only selected parameters are shown. Proceed to step 5.
5. Click “edit” in the top right-hand corner.
6. Under the tab Charts, you “Deselect all” and then “Select all” Base and Major elements so they’re all reflected in the Charts going forward.
7. Go to Charts, and see how the tank is progressing over time.
Share your tank trending with others:
1. Ensure the tank is considered “public” to be shared.
2. Click "Edit” on Dashboard right next to your tank.
3. Under the General tab, there is a checkbox named Public. Ensure this is checked so that others can see your tank Diagrams.
Then…Go to the Charts overview.
Lastly…copy the link in the browser bar and paste it where desired, such as here, messenger, email, etc.
Hats off to Cody for conducting this experiment and sharing this pertinent data. Case it closed.
